Microsoft, Windows Server 2012

Pass Easily with Newest Microsoft 70-417 Exam with Accurate Q&As in Complete Video Online

Note:  Pass4itsure offer less but most authentic questions by considering your 70-417 MCSE/MCSA/MCP/ exam requirement. We delete old questions from time to time which are no longer part of actual 70-417 MCSE/MCSA/MCP/ syllabus.Teststarter gives 100% surety that you will pass the 70-417 exam in first attempt if you buy and use our product.Before buying you should aware of the product. Try our free demo version for 70-417 dumps and make a gentle buying decision.We are providing 100% money back guarantee if you do not pass 70-417 Upgrading Your Skills to MCSA Windows Server 2012 exam in first attempt. You can see the necessary details from our guarantee page. Log in to our website and find updated products.

Exam Code:70-417
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012
Updated: Feb 23, 2017
Q&As: 427
Exam Information: https://www.pass4itsure.com/70-417.html
  Printable PDF: https://drive.google.com/open?id=0B2TyWAkDAzwIX090cjRidExIaGs

QQ截图20170302143240

Minimal effort Yet Effective Microsoft 70-417 Exam 

At Teststarter, we are sure that our Microsoft 70-417 readiness material with inquiries and answers pdf, 70-417 practice exam and 70-417 PDF are the most cheap and give most top to bottom answers for people that are get ready for the Microsoft 70-417 inquiries and answers. Microsoft 70-417 dumps (Upgrading Your Skills to MCSA Windows Server 2012) Jobs have remarkably contributed to a vital role in your life and also the improvement of your living standards. Sometimes you can get really frustrated due to failure of getting your job desires. Our simple to utilize and comprehend Microsoft 70-417 exam will permit you the chance to know precisely what’s in store on the exam day.

Share some Microsoft Specialist 70-417 Exam Questions and Answers Below:

QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
QQ图片20170302143813
You plan to create a checkpoint of VM1.
You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1.
What should you do before you create the checkpoint?
A. Decrease the Maximum RAM.
B. Convert Disk1.vhd to a dynamically expanding disk.
C. Run the Stop-VM cmdlet.
D. Run the Resize-VHD cmdlet.
Correct Answer: C
Explanation
Explanation/Reference:
Explanation:
For checkpoints created when the virtual machine is stopped The checkpoint contains the state of the hard
disks only. For checkpoints created when the virtual machine is running The checkpoint contains the state
of the hard disks and the data in memory. Note: A checkpoint saves the state of each virtual hard disk that
is attached to a virtual machine and all of the hard disk’s contents, including application data files. For
virtual machines on Hyper-V and VMware ESX Server hosts, a checkpoint also saves the hardware
configuration information. By creating checkpoints for a virtual machine, you can restore the virtual
machine to a previous state.

QUESTION 2
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V
server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
QQ图片20170302143939
You install a network monitoring application on VM2.
You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: J
Explanation
Explanation/Reference:
Explanation:
With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as
the switch port that receives copies of all the traffic. And since Port mirroring allows the network traffic of a
virtual machine to be monitored by copying the traffic and forwarding it to another virtual machine that is
configured for monitoring, you should configure port mirroring on VM2.
References:

QUESTION 3
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V
server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
QQ图片20170302144101
You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: I
Explanation
Explanation/Reference:
Explanation:
The Integration Services settings on virtual machines include services such as operating system
shutdown, time synchronization, data exchange, Heartbeat, and Backup (volume snapshot services). This
snapshot will ensure that the state of VM1 is saved prior to backup.
References:
http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx Exam Ref 70-410, Installing and
Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure
virtual machine settings, p. 144

QUESTION 4
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V
server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
QQ图片20170302144205
VM3 is used to test applications.
You need to prevent VM3 from synchronizing its clock to Server1.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: I
Explanation
Explanation/Reference:
Explanation:
Integration Services settings on virtual machines includes services such as operating system shutdown,
time synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you
should disable the time synchronization using Integration Services.
References:

QUESTION 5
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V
server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
QQ图片20170302144301
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: K
Explanation
Explanation/Reference:
Explanation:
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to
maximize network throughput while minimizing network latency and the CPU overhead required for
processing network traffic.
References:

QUESTION 6
You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. The imagex.exe command
B. The ocsetup.exe command
C. The setup.exe command
D. The dism.exe command
Correct Answer: D
Explanation
Explanation/Reference:
The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM:
Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server- Gui- Shell /
featurename:Server-Gui-Mgmt
QQ图片20170302144402

QUESTION 7
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to create an image of Server1.
You need to remove the source files for all server roles that are not installed on Server1.
Which tool should you use?
A. dism.exe
B. servermanagercmd.exe
C. ocsetup.exe
D. imagex.exe
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
The Dism utility can be used to create and mount an image of Server1.
References:

QUESTION 8
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has following storage
spaces:
Data
Users
Backups
Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk.
Which storage space contains the new disk?
A. Primordial
B. Data
C. Backups
D. Users
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:

QUESTION 9
Your network contains an Active Directory domain named contoso.com. The domain contains a server
named Server1. Server1 runs Windows Server 2012.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From a command prompt, run ss.exe and specify the config parameter.
B. From a command prompt, run ss.exe and specify the sdset parameter.
C. From the Services console, configure the General settings.
D. From Windows PowerShell, run Set-Service and specify the -PassThrough parameter.
Correct Answer: C
Explanation
Explanation/Reference:
* Services are often run with default settings — for example, a service might be disabled automatically at
startup. You can use the Services snap-in to change the default settings for a service.
* To configure how a service is started using the Windows interface
1. ClickStart , click in theStart Search box, typeservices.msc , and then press ENTER.
2. Optionally, export and save a list of the existing settings. To do this, right-clickServices , selectExport
List , and save the settings list.
3. In the details pane, right-click the service that you want to configure, and then clickProperties .
4. On theGeneral tab, inStartup type , clickAutomatic ,Manual ,Disabled , orAutomatic (Delayed Start) .
5. To specify the user account that the service can use to log on, click theLog On tab, and then do one of
the following:
Etc

QUESTION 10
You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2
Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Datacenter.
You want to achieve this goal by using the minimum amount of administrative effort.
What should you perform?
A. An online servicing by using Dism
B. An offline servicing by using Dism
C. An upgrade installation of Windows Server 2012 R2
D. A clean installation of Windows Server 2012 R2
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
There are a couple of ways to install the GUI from the command prompt, although both use the same tool –
DISM (Deployment Image Service Manager). When you are doing it for a single (local) server, the
command is:
Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:…
References:
Training Guide: Installing and Configuring Windows Server 2012: Chapter 2: Deploying Servers, p. 44
Exam Ref 70-410: Installing and Configuring Windows Server 2012: Chapter 1: Installing and Configuring
Servers, p. 19-22

70-417

Skillfully Made Microsoft 70-417 Exam 

The Microsoft 70-417 dumps, 70-417 practice exam and 70-417 vce inquiries and answers at Teststarter are composed and arranged by Microsoft associated mentors and instructors with many years of involvement in the IT field.  It is vital to be acquainted with the Microsoft MCSE (Upgrading Your Skills to MCSA Windows Server 2012) certification exam in a proper and right manner. The principle thing to note is that the 70-417 (Upgrading Your Skills to MCSA Windows Server 2012) exam is performed for both recruiting and testing of your different skills. This guarantees you are outfitted with the most recent and most current data of the Upgrading Your Skills to MCSA Windows Server 2012 to give you a superior possibility of passing the Microsoft 70-417 exam.
Strongly Recommended: https://www.collection4pdf.com/latest-101-exam-simulator-and-updated-101-pdf-download/